Показать сокращенную информацию
dc.contributor.author | Соседкова, М. А. | |
dc.contributor.author | Выдрин, А. В. | |
dc.contributor.author | Дубинский, Ф. С. | |
dc.contributor.author | Дукмасов, В. Г. | |
dc.contributor.author | Sosedkova, M. A. | |
dc.contributor.author | Dubinsky, F. S. | |
dc.contributor.author | Dukmasov, V. G. | |
dc.contributor.author | Vydrin, A. V. | |
dc.creator | Южно-Уральский государственный университет | ru_RU |
dc.creator | South Ural State University | en |
dc.date.accessioned | 2012-01-27T03:38:19Z | |
dc.date.available | 2012-01-27T03:38:19Z | |
dc.date.issued | 2010 | |
dc.identifier.citation | Моделирование температурных процессов с целью совершенствования технологии сортовой прокатки / М. А. Соседкова и др. // Вестник ЮУрГУ. Серия Металлургия.- 2010.- Вып. 15. № 34.- С. 71-75 | ru_RU |
dc.identifier.uri | http://dspace.susu.ac.ru/handle/0001.74/1153 | |
dc.description.abstract | Созданы математические модели, описывающие температурные процессы, происходящие в очаге деформации и технологическом потоке стана. На их основе решены задачи оптимизации технологических режимов для достижения заданной температуры полосы и устранения неравномерности распределения температуры по длине полосы. Математические модели напряженно-деформированного состояния и температурных полей в очаге деформации позволяют решать задачи прогнозирования дефектообразования на готовом профиле. Предложены мероприятия по совершенствованию существующих и разработке новых технологий и компоновки оборудования для прокатки сортовых профилей высокого качества с помощью моделирования температурных процессов. Mathematical models are created describing the thermal processes occurring in the deformation focus and process stream of the mill. On this basis the problems of optimization of technological regimes to achieve desired band temperature and eliminate uneven temperature distribution along the strip are solved. Mathematical models of stress-strain state and temperature fields in the deformation focus allow to solve the problem of forecasting defect formation on the finished profile. The measures are proposed to improve existing and develop new technologies and to construct equipment for rolling high-grade sections by modeling thermal processes. | ru_RU |
dc.language | ru | en |
dc.publisher | Издательский центр ЮУрГУ | ru_RU |
dc.relation.ispartof | Вестник ЮУрГУ. Серия Металлургия | ru_RU |
dc.relation.ispartof | Vestnik Yuzhno-Ural'skogo Gosudarstvennogo Universiteta. Seriya Metallurgiya | ru_RU |
dc.relation.ispartof | Bulletin of SUSU | en |
dc.relation.ispartofseries | Металлургия;Вып. 15 | |
dc.subject | УДК 621.771.01 | ru_RU |
dc.subject | моделирование процессов прокатки | ru_RU |
dc.subject | температурные режимы | ru_RU |
dc.subject | сортовые профили | ru_RU |
dc.subject | очаг деформации | ru_RU |
dc.subject | оптимизация технологических режимов | ru_RU |
dc.subject | калибровка прокатных валков | ru_RU |
dc.subject | simulation of rolling | ru_RU |
dc.subject | temperature regimes | ru_RU |
dc.subject | section bars | ru_RU |
dc.subject | focus of deformation | ru_RU |
dc.subject | optimization of technological regimes | ru_RU |
dc.subject | roll sizing | ru_RU |
dc.subject | прокатка | ru_RU |
dc.title | Моделирование температурных процессов с целью совершенствования технологии сортовой прокатки | ru_RU |
dc.title.alternative | Simulation of thermal processes with a view to improving the technology of bar rolling | ru_RU |
dc.type | Article | ru_RU |