Показать сокращенную информацию
dc.contributor.author | Буксбаум, В. Б. | |
dc.contributor.author | Усова, М. В. | |
dc.contributor.author | Buksbaum, V. B. | |
dc.contributor.author | Usova, M. V. | |
dc.date.accessioned | 2013-08-13T03:29:02Z | |
dc.date.available | 2013-08-13T03:29:02Z | |
dc.date.issued | 2011 | |
dc.identifier.citation | Буксбаум, В. Б. Расчет катающего радиуса валков с закрытыми калибрами трубосварочного агрегата (ТЭСА) / В. Б. Буксбаум, М. В. Усова // Вестник ЮУрГУ. Серия Металлургия.- 2011.- Вып. 17. № 36 (253).- С. 84-86 | ru_RU |
dc.identifier.issn | 1991-976X | |
dc.identifier.uri | http://dspace.susu.ac.ru/handle/0001.74/1935 | |
dc.description | Буксбаум Виктор Борисович, кандидат технических наук, начальник технического отдела, ОАО «Уралтрубмаш». Тел.: (351)7347352. E-mail: vbuksbaum@utbm.ru Buksbaum Viktor Borisovich, candidate of engineering science, head of the Engineering department, JSC “Uraltrubmash”. Tel.: (351)7347352. E-mail: vbuksbaum@utbm.ru Усова Мария Викторовна, инженертехнолог, ОАО «Уралтрубмаш». Тел.:(351)7347352. E-mail: usova-rabochiy@yandex.ru Usova Maria Viktorovna, industrial engineer, JSC “Uraltrubmash”. Tel.: (351)7347352. E-mail: usova-rabochiy@yandex.ru | ru_RU |
dc.description.abstract | Предложена методика расчета катающего радиуса валков в клетях с закрытыми калибрами через условие равенства площадей полной поверхности валка в зонах опережения и отставания. Разработан математический аппарат. Выполнен расчет катающего радиуса и габаритов верхних валков двух последних клетей (четвертой и пятой) трубоэлектросварочного агрегата для двух типоразмеров труб. The technique of calculation the rolling radius of the rolls in mills with closed calibers is presented by using the equality condition of the full roll’s surfaces in forward slip and backward slip areas. The mathematical tool is developed. The calculation of rolling radius and dimension of the rolls in two last mills (4th and 5th) of welding aggregate is carried out. | ru_RU |
dc.description.sponsorship | ОАО «Уралтрубмаш» | ru_RU |
dc.language.iso | other | ru_RU |
dc.publisher | Издательский центр ЮУрГУ | ru_RU |
dc.relation.ispartof | Вестник ЮУрГУ. Серия Металлургия | |
dc.relation.ispartof | Vestnik Ûžno-Ural’skogo gosudarstvennogo universiteta. Seriâ, Metallurgiâ | |
dc.relation.ispartof | Bulletin of SUSU | |
dc.relation.ispartofseries | Металлургия;Вып. 17 | |
dc.subject | формовка труб | ru_RU |
dc.subject | закрытый калибр | ru_RU |
dc.subject | скоростные условия процесса формовки | ru_RU |
dc.subject | катающий радиус | ru_RU |
dc.subject | tube forming | ru_RU |
dc.subject | closed caliber | ru_RU |
dc.subject | velocity condition of the process | ru_RU |
dc.subject | rolling radius | ru_RU |
dc.subject | УДК 621.774 | ru_RU |
dc.subject | УДК 621.774.8 | ru_RU |
dc.subject | УДК 621.771.2.07 | ru_RU |
dc.title | Расчет катающего радиуса валков с закрытыми калибрами трубосварочного агрегата (ТЭСА) | ru_RU |
dc.title.alternative | Calculation of rolling radius of rolls in mills with closed calibers of the tube welding aggregate | ru_RU |
dc.type | Article | ru_RU |