Показать сокращенную информацию
dc.contributor.author | Переверзев, П. П. | |
dc.contributor.author | Pereverzev, P. P. | |
dc.date.accessioned | 2013-08-27T03:59:32Z | |
dc.date.available | 2013-08-27T03:59:32Z | |
dc.date.issued | 2012 | |
dc.identifier.citation | Переверзев, П. П. Моделирование и оптимизация управляющих программ в автоматизированном машиностроительном производстве / П. П. Переверзев // Вестник ЮУрГУ. Серия Машиностроение.- 2012.- Вып. 19. № 12 (271).- С. 152-157.- Библиогр.: с. 157 (4 назв.) | ru_RU |
dc.identifier.issn | 1991-976X | |
dc.identifier.uri | http://dspace.susu.ac.ru/handle/0001.74/2208 | |
dc.description | Переверзев Павел Петрович. Доктор технических наук, доцент, профессор кафедры «Технология машиностроения», Южно-Уральский государственный университет. Область научных интересов – моделирование и оптимизация операций механической обработки. Е-mail: dtnppp@yandex.ru Pavel P. Pereverzev. Doctor of science (engineering), an associate professor, professor of Engineering technicues department, South Ural state university. The area of scientific interests – modeling and optimization of operations of machining. E-mail: dtnppp@yandex.ru | ru_RU |
dc.description.abstract | На примере операций круглого шлифования с поперечной подачей, выполняемых на металлорежущих станках с автоматическим циклом обработки и управлением от прибора активного контроля, приведено краткое описание методики расчета оптимальных управляющих программ. Оптимизация параметров цикла шлифования выполнена методом динамического программирования. On an example of operations of round grinding with the cross-section giving, carried out on metal-cutting machine tools with an automatic operation cycle and management from the device of active control, the short description of a design procedure of optimum operating programs is resulted. Optimization of loop variables of grinding is executed by a method of dynamic programming. | ru_RU |
dc.language.iso | other | ru_RU |
dc.publisher | Издательский центр ЮУрГУ | ru_RU |
dc.relation.ispartof | Вестник ЮУрГУ. Серия Машиностроение | |
dc.relation.ispartof | Vestnik Ûžno-Ural’skogo gosudarstvennogo universiteta. Seriâ Mašinostroenie | |
dc.relation.ispartof | Bulletin of SUSU | |
dc.relation.ispartofseries | Машиностроение;Вып. 19 | |
dc.subject | автоматический цикл | ru_RU |
dc.subject | шлифование | ru_RU |
dc.subject | управляющая программа | ru_RU |
dc.subject | оптимизация | ru_RU |
dc.subject | динамическое программирование | ru_RU |
dc.subject | automatic cycle | ru_RU |
dc.subject | the grinding | ru_RU |
dc.subject | the operating program | ru_RU |
dc.subject | optimization | ru_RU |
dc.subject | dynamic programming | ru_RU |
dc.subject | УДК 621.923-529 | ru_RU |
dc.subject | УДК 681.513.2 | ru_RU |
dc.subject | УДК 519.857 | ru_RU |
dc.title | Моделирование и оптимизация управляющих программ в автоматизированном машиностроительном производстве | ru_RU |
dc.title.alternative | Modelling and optimization of operating programs in the automated machine-building manufacture | ru_RU |
dc.type | Article | ru_RU |