Показать сокращенную информацию
dc.contributor.author | Карташев, А.Л. | |
dc.contributor.author | Кривоногов, А.А. | |
dc.contributor.author | Kartashev, A.L. | |
dc.contributor.author | Krivonogov, A.A. | |
dc.date.accessioned | 2019-12-19T09:00:40Z | |
dc.date.available | 2019-12-19T09:00:40Z | |
dc.date.issued | 2017 | |
dc.identifier.citation | Карташев, А.Л. Математическая модель трансформации двумерного течения в проточном тракте вихревого расходомера в трехмерное течение / А.Л. Карташев, А.А. Кривоногов // Вестник ЮУрГУ. Серия «Компьютерные технологии, управление, радиоэлектроника». – 2017. – Т. 17, № 2. – С. 93–102. DOI: 10.14529/ctcr170208. Kartashev A.L., Krivonogov A.A. Mathematical Model of Transformation a 2D Simulation Flowing Part of Vortex Flowmeter to 3D Case. Bulletin of the South Ural State University. Ser. Computer Technologies, Automatic Control, Radio Electronics, 2017, vol. 17, no. 2, pp. 93–102. (in Russ.) DOI: 10.14529/ctcr170208. | ru_RU |
dc.identifier.issn | 1991-976X | |
dc.identifier.issn | 2409-6571 | |
dc.identifier.uri | http://dspace.susu.ru/xmlui/handle/0001.74/26679 | |
dc.description | Карташев Александр Леонидович, д-р техн. наук, профессор кафедры летательных аппаратов, Южно-Уральский государственный университет, г. Челябинск; al_kartashev@mail.ru. Кривоногов Алексей Александрович, аспирант кафедры летательных аппаратов, Южно- Уральский государственный университет, г. Челябинск; alexeykrivonogov@mail.ru. A.L. Kartashev, al_kartashev@mail.ru, A.A. Krivonogov, alexeykrivonogov@mail.ru South Ural State University, Chelyabinsk, Russian Federation | ru_RU |
dc.description.abstract | Статья посвящена разработке математической модели, трансформирующей частоту, фазу, амплитуду двумерного течения в аналогичные параметры для трехмерного течения. В статье представлены результаты выполнения анализа существующей 3D модели, реализованной в пакете ANSYS, используемой для моделирования течения в проточной части вихревого расходомера. По результатам анализа картины течения в проточной части вихревого расходомера определены базовые точки геометрии проточного тракта вихревого расходомера, в которых будет проводиться математическое моделирование. Разработана функциональная структура математической модели определения параметров течения в проточной части вихревого расходомера для варианта двумерного моделирования. Осуществлен выбор математического метода трансформации трехмерной модели расчета проточного тракта вихревого расходомера в двумерную модель. Разработан вычислительный алгоритм математической модели, связывающей трехмерную и двумерную модели проточного тракта вихревого расходомера. Алгоритм основан на использовании быстрого преобразования Фурье и решении задачи минимизации для определения частоты, амплитуды и фазы сигнала. Актуальность исследования связана с выбором оптимального математического алгоритма моделирования процесса срыва вихрей с тела обтекания, находящегося в трубе (проточной части вихревого расходомера), и распространения вихрей ниже по потоку для последующей оптимизации. The article is devoted to the mathematical model development which transforming the twodimensional flow variable such as frequency, phase, amplitude in the three-dimensional values. The paper presents the analysis results an existing 3D model, which implemented in ANSYS software package. It is used to flow simulate in the flow part of vortex flowmeter. The control points of flow part geometry the vortex flowmeter was define as an analysis results of stream simulation result in the flow part of vortex flowmeter. Mathematical modeling was carried out in these control points and collected the simulation results. The functional structure of a mathematical model for determining the flow parameters in the flow part of the vortex flowmeter was created for the variant of two-dimensional simulation. The mathematical method of transformation the two-dimensional simulation results to a threedimensional model was selected for flow simulation in the flow part of vortex flowmeter. A computational algorithm is a mathematical model relating the three-dimensional and twodimensional model of a vortex flow meter flow part was created. The algorithm is based on the fast Fourier transform and the minimization problem solution to determine the frequency, amplitude and phase of the signal. Research relevance related to the choice of optimal mathematical algorithm simulation vortex shedding process from bluff body in a tube (the flow part of the vortex flowmeter), and vortices downstream distribution. | ru_RU |
dc.language.iso | other | ru_RU |
dc.publisher | Издательский центр ЮУрГУ | ru_RU |
dc.relation.ispartof | Вестник ЮУрГУ. Серия Компьютерные технологии, управление, радиоэлектроника | ru |
dc.relation.ispartof | Vestnik Yuzhno-Ural'skogo Gosudarstvennogo Universiteta. Seriya Kompjuternye tekhnologii, upravlenie, radioelektronika | en |
dc.relation.ispartof | Bulletin of SUSU | en |
dc.relation.ispartofseries | Компьютерные технологии, управление, радиоэлектроника;Том 17 | |
dc.subject | УДК 51-72 | ru_RU |
dc.subject | УДК 519.63 | ru_RU |
dc.subject | проточный тракт вихревого расходомера | ru_RU |
dc.subject | 3D модель | ru_RU |
dc.subject | 2D модель | ru_RU |
dc.subject | пакет программ ANSYS | ru_RU |
dc.subject | тестовые расчеты | ru_RU |
dc.subject | математический метод трансформации 2D модели | ru_RU |
dc.subject | число Струхаля | ru_RU |
dc.subject | Число Рейнольдса | ru_RU |
dc.subject | flow part | ru_RU |
dc.subject | vortex flowmeter | ru_RU |
dc.subject | 3D model | ru_RU |
dc.subject | 2D model | ru_RU |
dc.subject | the ANSYS software package | ru_RU |
dc.subject | test calculations | ru_RU |
dc.subject | mathematical method of transformation 2D model to 3D | ru_RU |
dc.subject | Strouhal number | ru_RU |
dc.subject | Reynolds number | ru_RU |
dc.title | Математическая модель трансформации двумерного течения в проточном тракте вихревого расходомера в трехмерное течение | ru_RU |
dc.title.alternative | Mathematical Model of Transformation a 2D Simulation Flowing Part of Vortex Flowmeter to 3D Case. | ru_RU |
dc.type | Article | ru_RU |
dc.identifier.doi | DOI: 10.14529/ctcr170208 |