Показать сокращенную информацию
dc.contributor.author | Кондаков, А.И. | |
dc.date.accessioned | 2020-03-23T09:25:37Z | |
dc.date.available | 2020-03-23T09:25:37Z | |
dc.date.issued | 2016 | |
dc.identifier.citation | Кондаков, А.И. Совершенствование подготовки производства деталей машин на основе применения формальных оценок подобия проектных решений / А.И. Кондаков // Вестник ЮУрГУ. Серия «Машиностроение». – 2016. – Т. 16, № 3. – С. 36–43. DOI: 10.14529/engin160305. Kondakov A.I. Improvement of Preproduction Machine Components on the Base of Applying Formal Estimation of Similarity Project Decisions. Bulletin of the South Ural State University. Ser. Mechanical Engineering Industry, 2016, vol. 16, no. 3, pp. 36–43. (in Russ.) DOI: 10.14529/engin160305. | ru_RU |
dc.identifier.issn | ISSN: 2410-4744 | |
dc.identifier.uri | http://dspace.susu.ru/xmlui/handle/0001.74/27142 | |
dc.description | Кондаков Александр Иванович, доктор технических наук, профессор кафедры «Технология машиностроения», Московский государственный технический университет им. Н.Э. Баумана, г. Москва, e-mail: kondakov1950@mail.ru. A.I. Kondakov, kondakov1950@mail.ru Bauman Moscow State Technical University, Moscow, Russian Federation | ru_RU |
dc.description.abstract | Показано, что современные системы автоматизации технологического проектирования являются системами лишь операционного уровня и не позволяют объективно оценивать и использовать подобие проектных решений. Обоснована актуальность исследований, направленных на выявление и использование для повышения эффективности подготовки производства связей и количественных формальных оценок подобия конструктивных и технологических проектных решений. Изложен научно-методический подход к определению и использованию при подготовке производства деталей машин количественных оценок подобия конструктивных и технологических проектных решений. Указаны приложения оценок подобия проектных решений при подготовке производства. Показано, что соотношение оценки подобия состава маршрутных технологических процессов изготовления любых двух деталей одной группы и оценки конструктивного подобия по составу технологических комплексов этих же деталей позволяет прогнозировать ожидаемые значения оценок технологического подобия заданной детали и детали предполагаемого аналога. Это позволяет организовать автоматизированный поиск технологических процессов-аналогов, требующих минимальной корректировки при преобразовании в единичные процессы изготовления заданных деталей. Использование формально определяемых в соответствии с предложенным подходом оценок подобия конструктивных и технологических проектных решений способствует повышению эффективности подготовки производства за счет: направленного поиска ближайших процессов-аналогов, объективного формирования групп технологически подобных деталей, объективного оценивания технологических возможностей производственной системы. It is show, that technological design automation systems are system of only operation level, which don’t allow to estimate a similarity of project design objectively. Relevance of the researches directed to identification and use for increase efficiency of preproduction communications and quantitative formal estimates of similarity of constructive and technology project solutions is proved. Scientific and methodical approach to determination and use by quantitative estimates of similarity of constructive and technology project solutions in preproduction machine components is stated. Applications of estimates of similarity of project decisions are specified in preproduction. It is shown that the ratio estimation of similarity of route technological processes structure of production any two details of one group and estimation of constructive similarity on structureof technological complexes of the same details allows to predict the expected values of estimates of technological similarity of the set detail and a detail of an estimated analog. It allows to organize the automated search of the technological processes analogs demanding the minimum adjustment when transforming to single processes of production the set details.Use formally determined according to the offered approach estimates of similarity of constructive and technology project solutions promotes increase in efficiency of preparation of production for the account: directed search of the next processes analogs, objective forming of groups of technologically similar details, objective estimation of technological capabilities of a production system. | ru_RU |
dc.language.iso | other | ru_RU |
dc.publisher | Издательский центр ЮУрГУ | ru_RU |
dc.relation.ispartof | Вестник ЮУрГУ. Серия Машиностроение | |
dc.relation.ispartof | Vestnik Ûžno-Ural’skogo gosudarstvennogo universiteta. Seriâ Mašinostroenie | |
dc.relation.ispartof | Bulletin of SUSU | |
dc.relation.ispartofseries | Машиностроение;Т. 16 | |
dc.subject | УДК 621.91 | ru_RU |
dc.subject | проектные решения | ru_RU |
dc.subject | подготовка производства | ru_RU |
dc.subject | конструктивное решение | ru_RU |
dc.subject | технологическое решение | ru_RU |
dc.subject | поддержка | ru_RU |
dc.subject | подобие | ru_RU |
dc.subject | деталь | ru_RU |
dc.subject | Mechanical engineering | ru_RU |
dc.subject | Import substitution | ru_RU |
dc.subject | Problem | ru_RU |
dc.subject | Criteria | ru_RU |
dc.subject | Production preparation | ru_RU |
dc.subject | Competitiveness | ru_RU |
dc.title | Совершенствование подготовки производства деталей машин на основе применения формальных оценок подобия проектных решений | ru_RU |
dc.title.alternative | Improvement of Preproduction Machine Components on the Base of Applying Formal Estimation of Similarity Project Decisions | ru_RU |
dc.type | Article | ru_RU |
dc.identifier.doi | DOI: 10.14529/engin160305 |