Показать сокращенную информацию
dc.contributor.author | Аль-Кхузаи, А.С.О. | |
dc.contributor.author | Широков, В.В. | |
dc.contributor.author | Выдрин, А.В. | |
dc.contributor.author | Al-Khuzaie, A.S.O. | |
dc.contributor.author | Shirokov, V.V. | |
dc.contributor.author | Vydrin, A.V. | |
dc.date.accessioned | 2021-06-10T11:19:16Z | |
dc.date.available | 2021-06-10T11:19:16Z | |
dc.date.issued | 2019 | |
dc.identifier.citation | Аль-Кхузаи, А.С.О. Определение диапазона изменения параметров напряжённо-деформированного состояния металла при непрерывной прокатке труб / А.С.О. Аль-Кхузаи, В.В. Широков, А.В. Выдрин // Вестник ЮУрГУ. Серия «Металлургия». - 2019. - Т. 19, № 1. - С. 74-79. DOI: 10.14529/met190109 Al-Khuzaie A.S.O., Shirokov V.V., Vydrin A.V. Determination of the Range of Variation of the Parameters of the Stress-Strain State of the Metal during Continuous Pipe Rolling. Bulletin of the South Ural State University. Ser. Metallurgy, 2019, vol. 19, no. 1, pp. 74-79. (in Russ.) DOI: 10.14529/met190109 | ru_RU |
dc.identifier.issn | 2411-0906 | |
dc.identifier.uri | http://dspace.susu.ru/xmlui/handle/0001.74/40082 | |
dc.description | Аль-Кхузаи Ахмед Салим Олейви, аспирант, Южно-Уральский государственный университет, г. Челябинск; asaalkhuzai@mail.ru. Широков Вячеслав Вячеславович, канд. техн. наук, доцент, Южно-Уральский государственный университет, г. Челябинск; shirokovvv@susu.ru; ORCID ID: 0000-0003-1663-9362. Выдрин Александр Владимирович, д-р техн. наук, профессор, Южно-Уральский государственный университет, г. Челябинск; vydrinav@susu.ru. A.S.O. Al-Khuzaie, asaalkhuzai@mail.ru, V.V. Shirokov, shirokovvv@susu.ru, A.V. Vydrin, vydrinav@susu.ru South Ural State University, Chelyabinsk, Russian Federation | ru_RU |
dc.description.abstract | Процессы продольной горячей прокатки бесшовных труб на оправке и без оправки широко используются на современных трубопрокатных агрегатах. При анализе технологии производства труб необходимо учитывать множество факторов, поэтому для определения влияния каждого из них на качество готовых труб целесообразно использовать компьютерное моделирование. На сегодняшний день известно довольно много программ, позволяющих моделировать процессы горячей прокатки методом конечных элементов. Одним из обязательных условий получения достоверных результатов при моделировании является корректный расчёт величины сопротивления металла пластической деформации. В данной работе при помощи компьютерного моделирования были определены диапазоны, в которых изменяются основные параметры, определяющие величину сопротивления пластической деформации. В программе QForm была промоделирована прокатка трубы на плавающей оправке в первых четырёх клетях непрерывного двухвалкового стана. Получены максимальные значения для таких величин, как скорость и величина деформации в клети, а также диапазон изменения температуры металла. The processes of longitudinal hot rolling of seamless pipes on a mandrel and without a mandrel are widely used in modern tube rolling machines. When analyzing the production technology of pipes, it is necessary to take into account many factors, therefore, to determine the effect of each of them on the quality of finished pipes, it is advisable to use computer simulation. To date, there are quite a few programs that allow you to simulate the processes of hot rolling by the finite element method. One of the prerequisites for obtaining reliable results in the simulation is the correct calculation of the resistance of the metal to plastic deformation. In this work, with the help of computer simulation, ranges were determined in which the main parameters that determine the value of resistance to plastic deformation change. In the QForm program, pipe rolling on a floating mandrel in the first four stands of a continuous two-roll mill was modeled. Maximum values were obtained for such quantities as the speed and magnitude of the deformation in the cages, as well as the range of the metal temperature. | ru_RU |
dc.language.iso | other | ru_RU |
dc.publisher | Издательский центр ЮУрГУ | ru_RU |
dc.relation.ispartof | Вестник ЮУрГУ. Серия Металлургия | |
dc.relation.ispartof | Vestnik Ûžno-Ural’skogo gosudarstvennogo universiteta. Seriâ, Metallurgiâ | |
dc.relation.ispartof | Bulletin of the South Ural State University. Ser. Metallurgy. | |
dc.relation.ispartofseries | Металлургия;Т. 19 | |
dc.subject | УДК 621.7.01 | ru_RU |
dc.subject | сопротивление пластической деформации | ru_RU |
dc.subject | метод конечных элементов | ru_RU |
dc.subject | непрерывная прокатка | ru_RU |
dc.subject | plastic strain resistance | ru_RU |
dc.subject | FEM | ru_RU |
dc.subject | longitudinal rolling | ru_RU |
dc.title | Определение диапазона изменения параметров напряжённо-деформированного состояния металла при непрерывной прокатке труб | ru_RU |
dc.title.alternative | Determination of the Range of Variation of the Parameters of the Stress-Strain State of the Metal during Continuous Pipe Rolling | ru_RU |
dc.type | Article | ru_RU |
dc.identifier.doi | DOI: 10.14529/met190109 |