dc.contributor.author |
Чаплыгин, А.Б. |
|
dc.contributor.author |
Чаплыгин, Б.А. |
|
dc.contributor.author |
Chaplygin, A.B. |
|
dc.contributor.author |
Chaplygin, B.A. |
|
dc.date.accessioned |
2020-03-12T11:13:35Z |
|
dc.date.available |
2020-03-12T11:13:35Z |
|
dc.date.issued |
2016 |
|
dc.identifier.citation |
Чаплыгин, А.Б. Особенности вертикальной прокатки упруго-вязких материалов / А.Б. Чаплыгин, Б.А. Чаплыгин // Вестник ЮУрГУ. Серия «Металлургия». – 2016. – Т. 16, № 1. – С. 54–58. DOI: 10.14529/met160107. Chaplygin A.B., Chaplygin B.A. Features of Vertical Rolling of Elastic and Viscous Materials. Bulletin of the South Ural State University. Ser. Metallurgy, 2016, vol. 16, no. 1, pp. 54–58. (in Russ.) DOI: 10.14529/met160107 |
ru_RU |
dc.identifier.issn |
2411-0906 |
|
dc.identifier.uri |
http://dspace.susu.ru/xmlui/handle/0001.74/27094 |
|
dc.description |
Чаплыгин Александр Борисович, канд. техн. наук, доцент кафедры машин и технологий обработки
материалов давлением, Южно-Уральский государственный университет, г. Челябинск; chaplyginab@susu.ru.
Чаплыгин Борис Александрович, д-р техн. наук, профессор кафедры машин и технологий обработки
материалов давлением, Южно-Уральский государственный университет, г. Челябинск; chaplyginba@susu.ru. A.B. Chaplygin, chaplyginab@susu.ru,
B.A. Chaplygin, chaplyginba@susu.ru
South Ural State University, Chelyabinsk, Russian Federation |
ru_RU |
dc.description.abstract |
В основе производства абразивного инструмента лежат процессы получения многокомпонентных
связок и упруго-вязких материалов, приготовления абразивных смесей и формования из них готовых изделий методами обработки материалов давлением. Вместе с тем процесс валкового смешивания из упруговязких материалов является узким местом и является одной из наиболее трудоемких и энергоемких операций. Недостаточная изученность процесса прокатки такого рода материалов затрудняет разработку
эффективных технических решений, которые бы позволили полнее реализовать потенциальные возможности технологии и оборудования.
Поэтому научно обоснованное определение основных параметров с учетом особенностей используемой схемы прокатки и реологии материала является актуальным.
Рассмотрены элементы теории прокатки абразивной упруго-вязкой массы в очаге деформации, образованном валками, оси которых находятся в горизонтальной плоскости, а прокат расположен в вертикальной плоскости. Приведены кинематические параметры процесса прокатки и геометрические параметры очага деформации, которые могут быть использованы в других отраслях промышленности связанных с производством смесей из упруго-вязких материалов.
Аналитические зависимости по всем аспектам процесса прокатки в качественном отношении хорошо согласуются с имеющейся опытной информацией. The production of the abrasive tool is based on the processes of receiving multicomponent sheaves and
elastic and viscous materials, as well as preparation of abrasive mixes and formation of finished products from
them by methods of processing materials by pressure. At the same time the process of roll mixing of elastic and
viscous materials is a bottleneck and is one of the most labour-consuming and power-intensive operations.
Insufficient studies of the process of rolling of such materials complicate the development of effective technical
solutions which would allow to fully realize potential opportunities of the technology and the equipment.
Therefore, evidence-based determination of key parameters on account of features of the used scheme of
rolling and rheology of the material is actual.
Elements of the theory of rolling of abrasive elastic and viscous weight in the deformation center formed
by rolls the axes of which lie in the horizontal plane are considered, and the hire is located in the vertical plane.
Kinematic parameters of the process of rolling and geometrical parameters of the deformation center, which can be
used in other industries connected with the production of mixes from elastic and viscous materials are specified.
Analytical dependences in all aspects of the process of rolling in a qualitative sense are well coordinated
with the available experimental information. |
ru_RU |
dc.language.iso |
other |
ru_RU |
dc.publisher |
Издательский центр ЮУрГУ |
ru_RU |
dc.relation.ispartof |
Вестник ЮУрГУ. Серия Металлургия |
|
dc.relation.ispartof |
Vestnik Ûžno-Ural’skogo gosudarstvennogo universiteta. Seriâ, Metallurgiâ |
|
dc.relation.ispartof |
Bulletin of SUSU |
|
dc.relation.ispartofseries |
Металлургия;Том 16 |
|
dc.subject |
УДК 621.922 |
ru_RU |
dc.subject |
очаг деформации |
ru_RU |
dc.subject |
скорость валков и полосы |
ru_RU |
dc.subject |
зоны опережения и отставания |
ru_RU |
dc.subject |
момент и мощность на бочке валков |
ru_RU |
dc.subject |
deformation centre |
ru_RU |
dc.subject |
speed of rolls and a strip |
ru_RU |
dc.subject |
zone of advancing and lag |
ru_RU |
dc.subject |
moment and power on roll flank |
ru_RU |
dc.title |
Особенности вертикальной прокатки упруго-вязких материалов |
ru_RU |
dc.title.alternative |
Features of Vertical Rolling of Elastic and Viscous Materials |
ru_RU |
dc.type |
Article |
ru_RU |
dc.identifier.doi |
DOI: 10.14529/met160107 |
|