Показать сокращенную информацию
dc.contributor.author | Антошкина, Е.Г. | |
dc.contributor.author | Смолко, В.А. | |
dc.contributor.author | Antoshkina, E.G. | |
dc.contributor.author | Smolko, V.A. | |
dc.date.accessioned | 2020-05-13T04:29:30Z | |
dc.date.available | 2020-05-13T04:29:30Z | |
dc.date.issued | 2016 | |
dc.identifier.citation | Антошкина, Е.Г. Показатель работоспособности литейных форм и стержней из синтетических песчаных смесей с учетом физических параметров / Е.Г. Антошкина, В.А. Смолко // Вестник ЮУрГУ. Серия «Металлургия». – 2016. – Т. 16, № 3. – С. 79–82. DOI: 10.14529/met160311. Smolko V.A., Antoshkina E.G. An Indicator of Working Capacity of Casting Molds and Cores Made of Synthetic Sand Mixtures with Account of Physical Parameters. Bulletin of the South Ural State University. Ser. Metallurgy, 2016, vol. 16, no. 3, pp. 79–82. (in Russ.) DOI: 10.14529/met160311 | ru_RU |
dc.identifier.issn | 2411-0906 | |
dc.identifier.uri | http://dspace.susu.ru/xmlui/handle/0001.74/27187 | |
dc.description | Смолко Виталий Анатольевич, д-р техн. наук, профессор, заведующий кафедрой неорганической химии, Южно-Уральский государственный университет, г. Челябинск; smolkova@susu.ru. Антошкина Елизавета Григорьевна, канд. техн. наук, доцент кафедры неорганической химии, Южно- Уральский государственный университет, г. Челябинск; antoshkinaeg@susu.ru. V.A. Smolko, smolkova@susu.ru, E.G. Antoshkina, antoshkinaeg@susu.ru South Ural State University, Chelyabinsk, Russian Federation | ru_RU |
dc.description.abstract | Рассматривается вопрос прочности литейных форм и стержней, в качестве характеристики которой предложено использовать показатель работоспособности. Получены выражения для определения показателя работоспособности Rb литейных форм и стержней из синтетических песчаных смесей с учетом фрактальной размерности наполнителя смесей Fr, коэффициента неоднородности прочностных свойств смесей m в различных участках формы (стержня) и параметра Грюнайзена GrL. Установлено, что показатель работоспособности должен быть в пределах Rb 1,5–3,0 в зависимости от конструкции формы и стержня, что обеспечит изготовление форм и стержней и предотвратит их разрушение в процессе транспортировки и будет гарантировать получение качественных отливок. Разработанная методика оценки служебных свойств форм (стержней) с учетом фрактальной размерности, ангармонизма и неоднородности прочностных характеристик смесей, позволяет на стадии инженерных расчетов, разработки технологического процесса формообразования и заливки установить показатель работоспособности формы как конструкции. The paper considers the strength of casting molds and cores, that is proposed to be characterized by the indicator of working capacity. Expressions for determining the indicator of working capacity Rb of molds and cores made from synthetic sand mixtures are obtained taking into account fractal dimension of the aggregate mixture Fr, the coefficient of heterogeneity of the mixture strength m in different parts of molds (cores) and the Grüneisen parameter GrL. It is found that the indicator of working capacity should be within Rb 1,5–3,0 depending on the design and shape of molds and cores. This will provide production of molds and cores, prevent their destruction during transportation and guarantee production of high-quality castings. The developed method of estimation of service properties of molds and cores considering fractal dimension, anharmonicity and heterogeneity of the strength characteristics of mixtures allows setting an indicator of working capacity of mold as a structure at the stage of engineering calculation and process design of mold shaping and filling. | ru_RU |
dc.language.iso | other | ru_RU |
dc.publisher | Издательский центр ЮУрГУ | ru_RU |
dc.relation.ispartof | Вестник ЮУрГУ. Серия Металлургия | |
dc.relation.ispartof | Vestnik Ûžno-Ural’skogo gosudarstvennogo universiteta. Seriâ, Metallurgiâ | |
dc.relation.ispartof | Bulletin of SUSU | |
dc.relation.ispartofseries | Металлургия;Том 16 | |
dc.subject | УДК 621.74 | ru_RU |
dc.subject | прочность | ru_RU |
dc.subject | формовочные смеси | ru_RU |
dc.subject | работоспособность форм и стержней | ru_RU |
dc.subject | strength | ru_RU |
dc.subject | molding mixtures | ru_RU |
dc.subject | working capacity of molds and cores | ru_RU |
dc.title | Показатель работоспособности литейных форм и стержней из синтетических песчаных смесей с учетом физических параметров | ru_RU |
dc.title.alternative | An Indicator of Working Capacity of Casting Molds and Cores Made of Synthetic Sand Mixtures with Account of Physical Parameters | ru_RU |
dc.type | Article | ru_RU |
dc.identifier.doi | DOI: 10.14529/met160311 |