Показать сокращенную информацию
dc.contributor.author | Барышев, В. И. | |
dc.contributor.author | Лайко, К. К. | |
dc.contributor.author | Baryshev, V. I. | |
dc.contributor.author | Laiko, K. K. | |
dc.date.accessioned | 2015-06-16T04:31:29Z | |
dc.date.available | 2015-06-16T04:31:29Z | |
dc.date.issued | 2013 | |
dc.identifier.citation | Барышев, В. И. Основы экспериментального определения прочности рабочих жидкостей / В. И. Барышев, К. К. Лайко // Вестник ЮУрГУ. Серия Машиностроение.- 2013.- Т. 13. № 2.- С. 105-112.- Библиогр.: с. 111-112 (9 назв.) | ru_RU |
dc.identifier.issn | 1990-8504 | |
dc.identifier.uri | http://dspace.susu.ac.ru/xmlui/handle/0001.74/4693 | |
dc.description | Барышев Валерий Иванович. Доктор технических наук, профессор кафедры «Гидравлика и гидропневмосистемы», Южно-Уральский государственный университет (Челябинск). Тел.: (351) 267-92-52. Лайко Константин Константинович. Аспирант кафедры «Гидравлика и гидропневмосистемы», Южно-Уральский государственный университет (Челябинск), ivnt_atya@mail.ru. V.I. Baryshev, South Urals State University, Chelyabinsk, Russian Federation, K.K. Laiko, South Ural State University, Chelyabinsk, Russian Federation, ivnt_atya@mail.ru | ru_RU |
dc.description.abstract | Рассмотрены причины и последствия снижения прочности жидкости. Приведен краткий аналитический обзор экспериментальных работ по описанию явления кавитации и исследованию ее первой стадии – образования несплошности в виде газового (парогазового) пузырька. Освещены и проанализированы результаты собственных исследований, особое внимание при этом уделено методике постановки экспериментов. There were examined factors and consequences of reducing of strength of working fluid. The research contains a brief analytical survey of theoretical and experimental works that are devoted to description of cavitation effect and investigation of its first stage which is carried out in production of discontinuity flaw in the form of gas (steam and gas) bubble. The results of the own researches are elucidated and analyzed in this work. The emphasis is devoted to the methods of experiments’ setting. | ru_RU |
dc.language.iso | other | ru_RU |
dc.publisher | Издательский центр ЮУрГУ | ru_RU |
dc.relation.ispartof | Вестник ЮУрГУ. Серия Машиностроение | |
dc.relation.ispartof | Vestnik Ûžno-Ural’skogo gosudarstvennogo universiteta. Seriâ Mašinostroenie | |
dc.relation.ispartof | Bulletin of SUSU | |
dc.relation.ispartofseries | Машиностроение;Том 13 | |
dc.subject | кавитация | ru_RU |
dc.subject | прочность жидкости | ru_RU |
dc.subject | несплошность жидкости | ru_RU |
dc.subject | давление разрыва | ru_RU |
dc.subject | отрицательное давление | ru_RU |
dc.subject | газовыделение | ru_RU |
dc.subject | масло | ru_RU |
dc.subject | вода | ru_RU |
dc.subject | рабочая жидкость | ru_RU |
dc.subject | cavities | ru_RU |
dc.subject | strength of fluid | ru_RU |
dc.subject | lack of adhesion of fluid | ru_RU |
dc.subject | working fluid | ru_RU |
dc.subject | bursting pressure | ru_RU |
dc.subject | negative pressure | ru_RU |
dc.subject | evolution of gas | ru_RU |
dc.subject | oil | ru_RU |
dc.subject | water | ru_RU |
dc.subject | УДК 532.528 | ru_RU |
dc.subject | ГРНТИ 30.17 | ru_RU |
dc.title | Основы экспериментального определения прочности рабочих жидкостей | ru_RU |
dc.title.alternative | Basis of experimental determination of the strength of the working fluids | ru_RU |
dc.type | Article | ru_RU |