Показать сокращенную информацию
dc.contributor.author | Смолко, В. А. | |
dc.contributor.author | Антошкина, Е. Г. | |
dc.contributor.author | Smolko, V. A. | |
dc.contributor.author | Antoshkina, E. G. | |
dc.date.accessioned | 2015-06-26T06:35:22Z | |
dc.date.available | 2015-06-26T06:35:22Z | |
dc.date.issued | 2013 | |
dc.identifier.citation | Смолко, В. А. Оценка пластических свойств и методика определения индекса текучести песчано-глинистых смесей / В. А. Смолко, Е. Г. Антошкина // Вестник ЮУрГУ. Серия Металлургия.- 2013.- Т. 13. № 1.- С. 202-204.- Библиогр.: с. 203 | ru_RU |
dc.identifier.issn | 1990-8482 | |
dc.identifier.uri | http://dspace.susu.ac.ru/xmlui/handle/0001.74/4813 | |
dc.description | Смолко Виталий Анатольевич, доктор технических наук, профессор, заведующий кафедрой неорганической химии, Южно-Уральский государственный университет. 454080, Челябинск, пр. Ленина, 76. Тел.: (351)2679376. E-mail: smolko-2007@mail.ru. Антошкина Елизавета Григорьевна, кандидат технических наук, доцент кафедры неорганической химии, Южно-Уральский государственный университет. 454080, Челябинск, пр. Ленина, 76. Тел.: (351)2679376. E-mail: aeg-2007@mail.ru. Smolko Vitaliy Anatol'evich, doctor of engineering science, professor, head of the Inorganic Chemistry Department, South Ural State University. 76 Lenin avenue, Chelyabinsk, Russia 454080. Tel.: 7(351)2679376. E-mail: smolko-2007@mail.ru. Antoshkina Elizaveta Grigor'evna, candidate of engineering science, associate professor of the Inorganic Chemistry Department, South Ural State University. 76 Lenin avenue, Chelyabinsk, Russia 454080. Tel.: 7(351)2679376. E-mail: aeg-2007@mail.ru. | ru_RU |
dc.description.abstract | Рассматривается вопрос оценки пластических свойств единых формовочных смесей. Разработана методика определения «индекса» текучести. Разработанная методика позволяет более точно определить влияние различных добавок (особенно при их малых количествах) на пластические свойства смесей и выбирать оптимальное количество добавок для получения качественных форм с четким отпечатком модели и требуемыми физико-химическими свойствами примесей. The article considers the question of evaluation of the plastic properties of sand mixtures. The method of determination of the “flow index” is worked out. The developed method allows to define more precisely the influence of different additives (especially in small amounts) on the plastic properties of mixtures and to select the optimal amount of additives to produce quality forms with a clear imprint of the model and required physical and chemical properties of the mixtures. | ru_RU |
dc.language.iso | other | ru_RU |
dc.publisher | Издательский центр ЮУрГУ | ru_RU |
dc.relation.ispartof | Вестник ЮУрГУ. Серия Металлургия | |
dc.relation.ispartof | Vestnik Ûžno-Ural’skogo gosudarstvennogo universiteta. Seriâ, Metallurgiâ | |
dc.relation.ispartof | Bulletin of SUSU | |
dc.relation.ispartofseries | Металлургия;Том 13 | |
dc.subject | УДК 621.74.01 | ru_RU |
dc.subject | УДК 621.742 | ru_RU |
dc.subject | пластические свойства формовочных смесей | ru_RU |
dc.subject | «индекс» текучести | ru_RU |
dc.subject | песчано-глинистые смеси | ru_RU |
dc.subject | plastic properties of sand mixtures | ru_RU |
dc.subject | “flow index” | ru_RU |
dc.subject | sand-clay mixtures | ru_RU |
dc.subject | ГРНТИ 55.15 | ru_RU |
dc.title | Оценка пластических свойств и методика определения индекса текучести песчано-глинистых смесей | ru_RU |
dc.title.alternative | Evaluation of plastic properties and method of determining of the flow index of sand-clay mixtures | ru_RU |
dc.type | Article | ru_RU |