Показать сокращенную информацию
dc.contributor.author | Мальцев, П. А. | |
dc.contributor.author | Дубинский, Ф. С. | |
dc.contributor.author | Выдрин, А. В. | |
dc.contributor.author | Maltsev, P. A. | |
dc.contributor.author | Dubinsky, F. S. | |
dc.contributor.author | Vydrin, A. V. | |
dc.creator | Южно-Уральский государственный университет | ru_RU |
dc.creator | South Ural State University | en |
dc.date.accessioned | 2011-12-02T04:29:24Z | |
dc.date.available | 2011-12-02T04:29:24Z | |
dc.date.issued | 2009 | |
dc.identifier.citation | Мальцев, П. А. Иерархический подход в разработке программного комплекса моделирования процессов прокатки / П. А. Мальцев, Ф. С. Дубинский, А. В. Выдрин // Вестник ЮУрГУ. Серия Металлургия.- 2009.- Вып. 12. № 14.- С. 57-59 | ru_RU |
dc.identifier.uri | http://dspace.susu.ac.ru/handle/0001.74/706 | |
dc.description.abstract | При определении формы и размеров переходных сечений малоизученным вопросом является определение уширения металла, а также формы поверхности, свободной от контакта с валками. Для решения этой задачи разработан программный комплекс на основе иерархического подхода, который объединяет научные методы моделирования процессов сортовой прокатки и эмпирические зависимости на различных уровнях решения задач. While defining the form and sizes of transitive sections, the definition of spreading of metal and the surface shape contactless with forming rolls is an insufficiently known question. To solve this problem a bundled software on the basis of the hierarchical approach was developed. It combines the scientific flat-and-edge rolling simulation techniques with empirical dependence at different levels of the problem solving. | ru_RU |
dc.language | ru | en |
dc.publisher | Издательский центр ЮУрГУ | ru_RU |
dc.relation.ispartof | Вестник ЮУрГУ. Серия Металлургия | ru_RU |
dc.relation.ispartof | Vestnik Yuzhno-Ural'skogo Gosudarstvennogo Universiteta. Seriya Metallurgiya | ru_RU |
dc.relation.ispartof | Bulletin of SUSU | en |
dc.relation.ispartofseries | Металлургия;Вып. 12 | |
dc.subject | УДК 621.771.01 | ru_RU |
dc.subject | прокатка | ru_RU |
dc.subject | моделирование процессов прокатки | ru_RU |
dc.subject | очаг деформации | ru_RU |
dc.subject | калибр | ru_RU |
dc.subject | программный комплекс | ru_RU |
dc.subject | метод конечных элементов | ru_RU |
dc.subject | rolling processes modeling | ru_RU |
dc.subject | deformation site | ru_RU |
dc.subject | roll pass | ru_RU |
dc.subject | bundled software | ru_RU |
dc.subject | finite element method | ru_RU |
dc.title | Иерархический подход в разработке программного комплекса моделирования процессов прокатки | ru_RU |
dc.title.alternative | Nierarchical approach to developing the bundled software of rolling processes modeling | ru_RU |
dc.type | Article | ru_RU |