Показать сокращенную информацию
dc.contributor.author | Usinin U.S. | en |
dc.contributor.author | Grigoriev M.A. | en |
dc.contributor.author | Vinogradov K.M. | en |
dc.contributor.author | Gorojankin A.N. | en |
dc.contributor.author | Gladyshev S.P. | en |
dc.date.accessioned | 2018-10-16T06:38:13Z | |
dc.date.available | 2018-10-16T06:38:13Z | |
dc.date.issued | 2009 | |
dc.identifier.uri | http://dspace.susu.ru/handle/0001.74/20583 | |
dc.description.abstract | The electric drive with the synchronous electrical machine of independent excitation differs by high specific parameters, adaptability to manufacture, simplicity of a design, and reliability. These properties of the electric drive allow using it in heavy conditions of operation. In particular, it can be recommended to use in electrical vehicles. The electric motor for this electric drive can be executed with two separate stator windings. Therefore, there are additional benefits connected to an opportunity of change of geometry of an iron stator stamp of the given type motor. In this report, the principle of operation of the electric drive with control system is considered. The different variants of a stator design of the electrical machine are discussed. The stator design allows improve of the mass and weight parameters of the electric machine. For the offered stator designs, the comparison of specific parameters (relationship of the nominal torque to load current) is carried out. The received results of analysis are discussed. Copyright © 2009 SAE International. | en] |
dc.language.iso | English | |
dc.relation.ispartof | SAE Technical Papers | en] |
dc.subject | Dimensional parameters | en] |
dc.subject | Electrical machine | en] |
dc.subject | Electrical vehicles | en] |
dc.subject | Load currents | en] |
dc.subject | Nominal torques | en] |
dc.subject | Power drives | en] |
dc.subject | Stator design | en] |
dc.subject | Stator winding | en] |
dc.subject | Design | en] |
dc.subject | Electric drives | en] |
dc.subject | Electric machinery | en] |
dc.subject | Electric vehicles | en] |
dc.subject | Electric windings | en] |
dc.subject | Powertrains | en] |
dc.subject | Stators | en] |
dc.subject | Electric properties | en] |
dc.title | Weight and dimensional parameters of a power drive for electrical vehicle | en |
dc.type | Conference Paper | en] |
dc.identifier.doi | 10.4271/2009-01-1886 | |
dc.identifier.scopus | https://www.scopus.com/inward/record.uri?eid=2-s2.0-84877493571&doi=10.4271%2f2009-01-1886&partnerID=40&md5=068ec5632187f739e922b2786bbbb1fc | |
dc.conference.name | Powertrains, Fuels and Lubricants Meeting, SFL 2009 | en] |
dc.conference.date | 15 June 2009 through 15 June 2009 |
Файл | Размер | Формат | Просмотр |
---|---|---|---|
В этом документе нет ни одного файла. |