Аннотации:
Рассмотрен процесс создания модели водоподготовительной установки в блочно-комплектном исполнении по технологии параметрического каркасного твердотельного моделирования с использованием программного продукта Autodesk Inventor Professional. Разрабатываемая водоподготовительная установка основывается на технологических схемах очистки подземных вод от растворенных газов (радона, сероводорода, углекислоты) и растворенных форм железа и марганца с помощью аэрации. В работе описан порядок создания модели, который содержит следующие этапы: подготовка расчетных схем (эскизов) модели, описание эскизов с помощью параметров, создание каркаса, тестирование каркасной модели; подготовка рабочей модели. Модель показала способность трансформироваться, т. е. изменять габариты при изменении параметров. Безошибочная трансформация модели при изменении параметров обеспечивается разветвленной схемой каркаса и привязкой компонентов в сборке к каркасу. Использование конструктивных пар делает возможным быструю замену компонентов в сборке при изменении технологической схемы установки. Мультипликация сборочных единиц и рост взаимосвязей между ними привели к увеличению конструктивных параметров, описывающих геометрию установки. На этапе подготовки к моделированию были созданы недостающие сборочные единицы технологического оборудования, арматуры и аппаратов, а также опубликованы библиотеки параметрических деталей для генератора рам. В работе предложен способ создания модельного ряда при изменении технологической схемы. В качестве примера рассмотрены два варианта подготовки воды (обезжелезивание и удаление радона), в результате получены две модели установок с разными массогабаритными характеристиками. В работе приводятся технологическая схема, компоновка технологического оборудования на плане в виде проекции габаритных размеров, структура сборки, изометрический вид установки. The process of creating a model of a water treatment plant in a block-complete design using the technology of parametric solid-state wireframe modeling with the help of the Autodesk Inventor Professional software product is considered. The water treatment plant being developed is based on technological schemes for treating underground waters from dissolved gases (radon, hydrogen sulfide, carbon dioxide) and dissolved forms of iron and manganese using aeration. The paper describes the procedure for creating a model, consisting of the following steps: preparation of design schemes (sketches) of the model, description of sketches using parameters, creation of a wireframe, testing of a wireframe model; preparation of a working model. The model has showed the ability to transform, i.e. to change dimensions when changing parameters. The error-free transformation of the model when changing parameters is ensured by the forked scheme of the wireframe and the binding of components in the assembly to the wireframe. The use of structural pairs makes it possible to quickly replace components in the assembly when changing the technological scheme of the installation. The multiplication of assembly units and the growth of interconnections between them has led to an increase in design parameters describing the geometry of the installation. At the stage of preparation for modeling, the missing assembly units of technological equipment, fittings and apparatus have been created, as well as libraries of parametric parts for the frame generator have been published. In this paper, a method for creating a model range when changing the technological scheme is proposed. As an example, two options for water treatment (deferrization and radon removal) have been considered. As a result, two models of installations with different weight and size characteristics have been obtained. The paper presents the technological scheme, the layout of technological equipment in plan in the form of a projection of overall dimensions, the assembly structure, and the isometric view of the installation.
Описание:
Новосёлов Максим Григорьевич, магистрант кафедры «Градостроительство, инженерные сети и системы», Южно-Уральский государственный университет (Челябинск), maximnovoselov220@gmail.com
Белканова Марина Юрьевна, доцент кафедры «Градостроительство, инженерные сети и системы», Южно-Уральский государственный университет (Челябинск), belkanovami@susu.ru. M.G. Novoselov, maximnovoselov220@gmail.com
M.Yu. Belkanova, belkanovami@susu.ru
South Ural State University, Chelyabinsk, Russian Federation