dc.contributor.author |
Выдрин, А. В.
|
|
dc.contributor.author |
Космацкий, Я. И.
|
|
dc.contributor.author |
Баричко, Б. В.
|
|
dc.contributor.author |
Vydrin, A. V.
|
|
dc.contributor.author |
Kosmatsky, Ya. I.
|
|
dc.contributor.author |
Barichko, B. V.
|
|
dc.date.accessioned |
2013-08-28T05:43:27Z |
|
dc.date.available |
2013-08-28T05:43:27Z |
|
dc.date.issued |
2012 |
|
dc.identifier.citation |
Выдрин, А. В. Математическое моделирование процесса прессования труб переменного сечения / А. В. Выдрин, Я. И. Космацкий, Б. В. Баричко // Вестник ЮУрГУ. Серия Металлургия.- 2012.- Вып. 18. № 15 (274).- С. 122-125.- Библиогр.: с. 125 (5 назв.) |
ru_RU |
dc.identifier.issn |
1991-976X |
|
dc.identifier.uri |
http://dspace.susu.ac.ru/handle/0001.74/2262 |
|
dc.description |
Выдрин Александр Владимирович, доктор технических наук, профессор кафедры обработки металлов давлением, Южно-Уральский государственный университет. Тел.: (351)2679481.
Vydrin Alexander Vladimirovich, doctor of engineering science, professor of the Metal Deformation Process department, South Ural State University. Tel.: (351)2679481.
Космацкий Ярослав Игоревич, инженер лаборатории волочения и прессования, ОАО «Российский научно-исследовательский институт трубной промышленности». 454139, г. Челябинск, ул. Новороссийская, 30. Тел.: (351)2543878. E-mail:
kosmatski@rosniti.ru
Kosmatsky Yaroslav Igorevich, engineer of the Drawing and Pressing laboratory, JSC “Russian Research Institute for the Tube and Pipe Industries”. 30 Novorossiyskaya street, Chelyabinsk, Russia 454139. Tel.: (351)2543878. E-mail: kosmatski@rosniti.ru Баричко Борис Владимирович, кандидат технических наук, начальник отдела бесшовных труб, ОАО «Российский научно-исследовательский инсти-тут трубной промышленности». 454139, г. Челя-бинск, ул. Новороссийская, 30. Тел.: (351)2543878. E-mail: barichko@rosniti.ru
Barichko Boris Vladimirovich, candidate of engineering science, head of the Seamless Pipe de-partment, JSC “Russian Research Institute for the Tube and Pipe Industries”. 30 Novorossiyskaya street, Chelyabinsk, Russia 454139. Tel.: (351)2543878. E-mail: barichko@rosniti.ru |
ru_RU |
dc.description.abstract |
Представлена постановка задачи математического исследования процесса прессования труб переменного сечения. Разработана математическая модель определения усилия прессования при использовании специфической профилировки прессового инструмента, позволяющая прогнозировать возможность изготовления труб заданного сортамента и определять рациональную форму прессового инструмента. Представлены результаты численного исследования процесса прессования с использованием полученной модели.
The paper presents a statement of the problem of mathematical study of pressing process of pipes of varying section. A mathematical model is developed for defining the
effort of pressing when a specific calibration of pressing tool is used allowing to predict the possibility of manufacturing pipes of the set assortment and to define the rational form of pressing tool. Results of numerical research of pressing process by means of the obtained model are presented. |
ru_RU |
dc.description.sponsorship |
Российский научно-исследовательский институт трубной промышленности |
ru_RU |
dc.language.iso |
other |
ru_RU |
dc.publisher |
Издательский центр ЮУрГУ |
ru_RU |
dc.relation.ispartof |
Вестник ЮУрГУ. Серия Металлургия |
|
dc.relation.ispartof |
Vestnik Ûžno-Ural’skogo gosudarstvennogo universiteta. Seriâ, Metallurgiâ |
|
dc.relation.ispartof |
Bulletin of SUSU |
|
dc.relation.ispartofseries |
Металлургия;Вып. 18 |
|
dc.subject |
прессование металлов |
ru_RU |
dc.subject |
параметры пресс-иглы |
ru_RU |
dc.subject |
толщина стенки трубы |
ru_RU |
dc.subject |
очаг деформации |
ru_RU |
dc.subject |
моделирование |
ru_RU |
dc.subject |
усилие прессования |
ru_RU |
dc.subject |
pressing of metals |
ru_RU |
dc.subject |
press needle parameters |
ru_RU |
dc.subject |
pipe wall thickness |
ru_RU |
dc.subject |
deformation center |
ru_RU |
dc.subject |
modeling |
ru_RU |
dc.subject |
effort of pressing |
ru_RU |
dc.subject |
УДК 621.774.38.001.57 |
ru_RU |
dc.subject |
УДК 001.891.573 |
ru_RU |
dc.title |
Математическое моделирование процесса прессования труб переменного сечения |
ru_RU |
dc.title.alternative |
Mathematical modeling of the pressing process of pipes of varying section |
ru_RU |
dc.type |
Article |
ru_RU |