Resumen:
Для процесса высокоэнергетического прессования графитопластовой композиции и определения давления рассмотрено взаимодействие частиц смеси между собой, а также их
влияние на процесс уплотнения.
Выявлены закономерности и построены эпюры кантатного взаимодействия, определены
величины внешнего усилия, действующего по всей контактной поверхности.
Рассмотрены изменения удельных усилий, действующих на поверхностях контакта между твердой и мягкой составляющими композиции в процессе прессования.
Проанализированы известные методы оценки давления при прессовании, выявлены их
недостатки для предлагаемой композиции «графит + смола». Выстроена методика моделирования процесса прессования согласно реологическим особенностям материала композиции.
Определены методы решения задачи по заполнению мягкой составляющей пространства
между твердыми компонентами смеси. Заданы схемы возможного уплотнения частиц смеси и
выведены уравнения, позволяющие определить необходимое давление для графитопластовой
композиции с разной компоновкой.
Представлена схема формирования контактной поверхности при внедрении твердой в
мягкую составляющую композиции. Выявлены основные факторы и установлены коэффициенты, влияющие на процесс уплотнения.
Смоделирован процесс прессования графитопластовой композиции с использованием
методов теории пластичности. Для решения объемной задачи применен метод суперпозиции
процессов в двух взаимноперпендикулярных плоскостях. Процесс прессования графитопластовой композиции условно разделен на два этапа. Определены допущения, которые заключаются в аппроксимации реальной формы контактирующих поверхностей упрощенными геометрическими формами: шаровой, цилиндрической, гиперболической, гиперболоидом вращения, параболической, эллиптической и др.
Получены математические зависимости для определения давления, реализуемого при
внедрении твердой составляющей в мягкую и при заполнении пространства между твердыми
составляющими мягкой. Дана оценка энергоемкости высокоэнергетического процесса прессования графитопластовой композиции. For the process of high-energy pressing of the graphite-plastic composition and determination
of pressure, the interaction of the particles of the mixture with each other, as well as their influence
on the compaction process is considered.
Regularities are revealed and epyuri of cantata interaction are plotted and the magnitude of external
force acting across the entire contact surface is determined.
The changes in the specific forces acting on the contact surfaces between the hard and soft
components of the composition during the pressing process are considered.
The known methods of pressure estimation during pressing are analyzed, their disadvantages
for the proposed composition “graphite + resin” are revealed. A method of modeling the process of
pressing is built, according to the rheological characteristics of the material of the composition.
The methods for solving the problem of filling the soft component of the space between the solid
components of the mixture are determined. Schemes of possible compaction of the mixture particles
are given and equations are derived that allow one to determine the required pressure for a
graphitoplast composition with different configurations.
A diagram of the formation of a contact surface when introducing a solid into the soft component
of the composition is presented. The main factors are identified and the coefficients affecting
the compaction process are established.
The process of pressing a graphitoplast composition was simulated using the methods of
the theory of plasticity. To solve a three-dimensional problem, a method of superposition of processes
in two mutually perpendicular planes is applied. The process of pressing a graphitoplast composition
is conventionally divided into two stages. The assumptions that lie in the approximation of the
real shape of the contacting surfaces by simplified geometric forms: ball, cylindrical, hyperbolic, hyperboloid
of rotation, parabolic, elliptic, etc. are determined.
Mathematical dependences are obtained to determine the pressure that is realized when a solid
component is introduced into the soft component and when the space between the solid components
is soft. An assessment of the energy intensity of the high-energy process of pressing the graphiteplastic
composition is given.
Descripción:
Самодурова Марина Николаевна, канд. техн. наук, доцент, доцент кафедры процессов и
машин обработки металлов давлением, Южно-Уральский государственный университет, г. Челябинск; mar-samodur@yandex.ru, samodurovamn@susu.ru.
Огарков Николай Николаевич, д-р техн. наук, профессор, заведующий кафедрой технологии машиностроения, Магнитогорский государственный технический университет им. Г.И. Носова, г. Магнитогорск; ogarkovnikolai@mail.ru.
Платов Сергей Иосифович, д-р техн. наук, профессор, заведующий кафедрой машин и технологий обработки давлением, Магнитогорский государственный технический университет
им. Г.И. Носова», г. Магнитогорск; psipsi@mail.ru. M.N. Samodurova1, mar-samodur@yandex.ru, samodurovamn@susu.ru,
N.N. Ogarkov2, ogarkovnikolai@mail.ru,
S.I. Platov2, psipsi@mail.ru
1 South Ural State University, Chelyabinsk, Russian Federation,
2 Nosov Magnitogorsk State Technical University, Magnitogorsk, Russian Federation